| 塑料路沿石模具生产过程 |
| 添加时间：2019/8/15 15:36:27 浏览次数： |
| 生产过程 Production process 流程 Technological process 定量加料——熔融塑化——施压注射——充模冷却——启模取件——试模 Quantitative Feeding-Melting Plasticization-Pressure Injection-Filling Cooling-Opening Parts-Test Mould 检验 test 模具是否合格需要通过试模来确定试模是指在模具开发和制造流程中在产品完成模具制作后、批量生产前所进行的测试注塑步骤。模具在完成所有配件并装配完毕后，需要通过实际的注塑并得到注塑样品，然后通过样品检测才能确定模具的制作是否完全符合设计要求。 Whether the mould is qualified or not needs to be determined by the test mold, which refers to the test injection process after the completion of the mold production and before mass production in the mold development and manufacturing process. After all the parts of the mould are finished and assembled, the injection samples need to be obtained through actual injection, and then the samples can be tested to determine whether the manufacture of the mould fully meets the design requirements. |
| 上一页 连云港市区部分路段路牙石上有了黄色实线 |
| 下一页 路牙石模具材质工艺 |