| 塑料路沿石模具检验 |
| 添加时间：2019/10/28 14:27:48 浏览次数： |
| 塑料路沿石模具检验 Mould inspection of plastic curbstone 模具是否合格需要通过试模来确定试模是指在模具开发和制造流程中在产品完成模具制作后、批量生产前所进行的测试注塑步骤。模具在完成所有配件并装配完毕后，需要通过实际的注塑并得到注塑样品，然后通过样品检测才能确定模具的制作是否完全符合设计要求。 Whether the mold is qualified or not needs to be determined by mold test, which refers to the test injection steps that are carried out in the mold development and manufacturing process after the completion of mold production and before mass production. After all the parts of the mold are assembled, it is necessary to get the injection samples through the actual injection molding, and then through the sample testing to determine whether the mold production completely meets the design requirements. |
| 上一页 路沿石钢模具的主要应用 |
| 下一页 路沿石的安装形式 |